Serial 1 Maintenance Schedule

Service must be performed at specified intervals to keep your eBicycle operating at peak performance.

Note: Perform maintenance more frequently in severe riding conditions such as extreme temperatures, dusty environments, rough roads, long storage conditions, short runs, or heavy stop & go traffic.
Perform spoke tension check at every 10 hours or after a hard ride over rough roads.
Regular maintenance needs to continue for the entire time the eBicycle is owned. 

Regularly maintain adequate charge in your battery, even when not in active use.

Minimum Service Intervals:

 

Recommended Service	Each Ride	1 Month	6 Months	12 Months
(repeated at every interval)	0 mi (0 km)	250 mi (400 km)	1500 mi (2400 km)	3000 mi  (4800 km)
Check tire pressure and tread, wheel rims for damage	X	X	X	X
Charge battery fully	X	X	X	X
Check brake functionality	X	X	X	X
Check lamp and reflector functionality	X	X	X	X
Check bell functionality	X	X	X	X
Verify handlebars and fork/front wheel turn	X	X	X	X
Check and adjust / retighten nuts, bolts, and screws and verify torque values	X	X	X	X
Check wheel spoke tightness		X	X	X
Check handlebar clamp fastener screw torque		X	X	X
Check axle nut torque		X	X	X
Inspect and lubricate kick stand and pedals		X	X	X
Inspect frame for cracks, breaks, nicks, failed welds		X	X	X
Road test to verify component and system functions		X	X	X
Inspect brake pads and discs for wear and alignment		X	X	X
Check alignment of sprocket and the belt tension			X	X
True wheels			X	X
Inspect brake system for leaks, abrasion, or stretch				X

 

Full E-bike Tune-Ups are recommended minimum every 12 months at a local bike shop or any Serial 1 dealer.

CAUTION: As with all mechanical components are subjected to wear and stresses, fatigue will occur. If the design life of a component has been exceeded, it may suddenly fail, possibly causing injury or damage. Regular servicing can help identify potential issues.